HEAVY CUT

STAGE 2

Both HEAVY CUT & FINE CUT make up the ELEMENTS XPERT two-stage process to paint restoration. This second stage FINE CUT compound can be used after HEAVY CUT to further enhance the gloss and clarity of paintwork or as a stand-alone process to enhance a paint finish. Designed to leave paint with an enhanced level of gloss, FINE CUT should be used with the ELEMENTS fine cut pad and random orbital, rotary polishing machine or even used by hand.

Directions
To be used with an ELEMENTS MICRO FINE PAD and a polishing machine set to 1500rpm-1800rpm. Shake well before use. Begin by priming your pad. Then apply five evenly spaced out pee sized amounts of FINE CUT to your pad. Work on a small area at a time. With the machine turned off press the pad onto the panel at points to mark out a grid and spread the compound. With the pad flat to the panel start the machine, apply light pressure and begin by working the machine back and forth slowly across the marked out area working your way down with each pass. Once at the bottom of the area start to move the machine in the up and down direction slowly working the pad across the area with each pass. Move onto the next section. Work the area until the product starts to turn clear. Once complete wipe any residue away with an ELEMENTS Premium microfibre cloth. ELEMENTS STAY CLEAN, Quick detailer spray can also be used to help remove residue.